New Toy : DFI NF570-SLi M2/G (motherboard)

Just received my new motherboard : SLI-based DFI NF570 Infinity M2/G

Will play around with it these few days hehe.

Mainboard Specifications

• CPU
  • AMD Athlon 64 FX / Athlon 64 X2 / Athlon 64 / Sempron
  • Socket AM2
• HyperTransport
  • 2000MT/s HyperTransport interface
• Chipset
  • NVIDIA nForce 570
• System Memory
  • Four 240-pin DDR2 DIMM sockets
  • Supports DDR2 533, DDR2 667 and DDR2 800 DIMMs
  • Supports dual channel (128-bit wide) memory interface
  • Supports up to 8GB system memory
• Expansion Slots
  • 2 PCI Express x16 slots (PCIE 1 slot operates at x16 bandwidth, PCIE 3 slot operates at x1 bandwidth)
  • 1 PCI Express x1 slot
  • 3 PCI slots
• BIOS
  • Award BIOS
  • 4Mbit flash memory
• Power Management
  • ACPI and OS Directed Power Management
  • ACPI STR (Suspend to RAM) function
  • Wake-On-PS/2 Keyboard/Mouse
  • Wake-On-LAN
  • RTC timer to power-on the system
• Hardware Monitor
  • Monitors CPU/system/chipset temperature
  • Monitors 5V/12V/Vcore/Vbat Dual voltages
  • Monitors the speed of the cooling fans
  • CPU Overheat Protection function monitors CPU temperature during system boot-up
• Audio
  • Realtek ALC882 High Definition audio CODEC
  • 8-channel audio output
  • S/PDIF interface
• LAN
  • NVIDIA® chip integrated with Gigabit MAC (Media Access Control) technology
  • Marvell 88E1115 Gigabit Phy
  • Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX) and 802.3ab (1000BASE-T) standards
• IDE
  • One IDE connector allows connecting up to two UltraDMA 133Mbps hard drives
• Serial ATA with RAID
  • Six Serial ATA ports
  • SATA speed up to 3Gb/s
  • RAID 0, RAID 1, RAID 0+1 and RAID 5
• IEEE 1394
  • VIA VT6307
  • Supports two 100/200/400 Mb/sec ports
• Rear Panel I/O
  • 1 mini-DIN-6 PS/2 mouse port
  • 1 mini-DIN-6 PS/2 keyboard port
  • 1 optical S/PDIF-out
  • 1 RCA S/PDIF-out
  • 1 parallel port
  • 1 COM port
  • 1 IEEE 1394 port
  • 1 RJ45 LAN port
  • 4 USB 2.0/1.1 ports
  • Line-in, line-out (front R/L) and mic-in jacks
  • Center/subwoofer, rear R/L and side R/L jacks
• Internal I/O
  • 3 connectors for 6 additional external USB 2.0/1.1 ports
  • 1 connector for 1 external IEEE 1394 port
  • 1 front audio connector for external line-out and mic-in jacks
  • 1 CD-in internal audio connector
  • 1 S/PDIF connector for optical cable connection
  • 1 IrDA connector
  • 6 Serial ATA connectors
  • 1 IDE connector
  • 1 floppy connector
  • 1 24-pin ATX power connector
  • 1 8-pin ATX 12V power connector
  • 1 4-pin 5V/12V power connector (FDD type)
  • 1 front panel connector
  • 5 fan connectors
  • EZ touch switches (power switch and reset switch)
• PCB
  • ATX form factor
  • 22cm (8.66″) x 30.5cm (12″)

Here is some pictures I took for it: